多特征联合水声通信信号调制识别方法

Modulation Recognition Method of Underwater Acoustic Communication Signal Based on Multi Feature Combination

摘要:

为解决水声信道下通信信号识别困难的问题,对水声 CW、LFM、2FSK、4FSK、BPSK、QPSK、DSSS-BPSK 和 OFDM 信号的调制识别技术进行了研究,旨在提出一种适用于这 8 种信号的调制识别方法。通过对信号的时频特征、二次方谱特征及自相关特征进行分析,并利用基于迁移学习的 ResNet 网络和线性支持向量机进行分类,最终得到了一种多特征联合水声通信信号调制识别方法。仿真表明:在千岛湖多径信道下,信噪比大于 9 dB 时,所研究 8 种信号的识别率均在 99%以上 ；最后,通过海试进一步验证了该方法的可行性,海试数据识别率均在 93%以上。仿真及海试验证的结果表明,所提的方法是适用于水声信道的

Abstract:

In order to solve the problem of communication signal recognition in underwater acoustic channel， the modulation recognition technology of underwater acoustic CW，LFM，2FSK，4FSK，BPSK，QPSK，DSSS-BPSK and OFDM signals is studied，aiming to propose a modulation recognition method suitable for these 8 signals. By analyzing the time-frequency characteristics，quadratic spectrum characteristics and autocorrelation characteristics of the signals，and using the ResNet network based on transfer learning and the linear support vector machine for classification，a multi feature combined underwater acoustic communication signal modulation recognition method is finally obtained. The simulation shows that when the SNR is greater than 9dB in the Qiandao Lake multipath channel，the recognition rate of the 8 signals studied is above 99%. Finally，the feasibility of this method is further verified through sea trial，and the recognition rate of sea trial data is above 93%. The simulation and sea trial results show that the proposed method is suitable for underwater acoustic channel.